TDK Announces 24V DIN Rail Power Supply Certified to Class II and Class 2 standards

February 25th, 2019

TDK Corporation (TSE 6762) announces the introduction of an 88W rated 24V model to the DRL series of low profile AC-DC DIN rail mount power supplies.  The DRL100-24-1/C2 is certified as a Class 2 power supply, in accordance with NEC (per UL1310), and as a Limited Power Source (per UL 60950 clause 2.5 requirements).  The unit is also has a Class II construction with double insulation for operation without an earth ground connection.  Applications include building automation, security systems, industrial process control, factory automation, and test and measurement equipment.

Learn more at www.us.tdk-lambda.com

Tags: , , ,
Posted in Showcase | No Comments »

TDK Announces 95% Efficient 960W DIN Rail Power Supply has a 1440W Peak Power Capability

February 25th, 2019

 

TDK Corporation (TSE 6762) announces the introduction of a 960W rated model to the DRF series of AC-DC DIN rail mount power supplies.  The high 95% efficiency produces less internal waste heat enabling electrolytic capacitors to run cooler, providing a calculated life of in excess of eleven years with a 75% load at 230Vac input.  The unit can supply a peak load of 1440W (24V 60A) for up to 4 seconds to power capacitive and inductive loads.  Applications include industrial process control, factory automation, and test and measurement equipment.

Learn more at www.us.tdk-lambda.com

Tags: , , ,
Posted in Showcase | No Comments »

TDK Corporation announces Convection Cooled 600W Programmable Power Supplies Are Certified to Medical and Industrial Standards

February 6th, 2019

 

TDK Corporation (TSE 6762) announces the introduction of the TDK-Lambda GXE600 programmable AC-DC power supplies.  The convection cooled 600W rated series is certified to the medical IEC 60601-1 and industrial IEC 60950-1 and IEC 62368-1 standards. The GXE600 is suitable for medical, industrial, test and measurement applications requiring wide-range output voltage and current programming, with sensitivity to noise from cooling fans.

The GXE600 is available with a nominal 24V or 48V output and can be programmed, using the RS-485 interface (Modbus RTU protocol) or an external 0 – 6V analog signal, for constant voltage and constant current (CVCC) operation.  The programming range is 20% to 120% for the voltage and 20% to 100% for the current.  In addition, the parameters for fault programming (protection level and recovery characteristics) and the slew rate timing can be changed.  Remaining electrolytic capacitor life, operating hours and alarm history can be read through the RS-485 interface, aiding remote preventative maintenance.

More information available at us.tdk-lambda.com

Tags: , ,
Posted in Showcase | No Comments »

C&K Announces ATP19 & ATP22 Series Anti-Vandal Sealed Pushbutton Switches

February 6th, 2019

 

C&K’s ATP19/22 series are high-strength, lightweight metal switches that meet the IP67/IK10 requirements, ensuring their suitability for operation in harsh conditions and the ability to withstand potential malicious damage.

Both the ATP19 and ATP22 series are available in momentary or self-lock actuation versions suitable for application versatility. Able to withstand heavy physical abuse, including attempted damage using metal tools, the switches target applications such as control panels in car parks and traffic lights, industrial instruments, elevators, escalators, communication equipment and alarms, safety and security systems.

View ATP19 series technical information

View ATP22 series technical information

Tags: , ,
Posted in Showcase | No Comments »