TDK Lambda CUS250M Series

October 12th, 2022



for medical and industrial applications

Achieving 250 watts in a noiseless 2″ x 4″ package

CUS250M Series

Ultra-compact single output CUS250M power supplies.

  • Up to 250W with convection and conduction cooling
  • Compact 2 x 4 inch footprint
  • Silent operation
  • Ideal for medical and many other applications

The series provides excellent flexibility for an easy design in and extraordinary standout features.

TDK 1.4 to 3W DC-DC converters operate from a 12V input and provide very low noise output voltages of up to 2,000V

May 26th, 2021

TDK Corporation announces the introduction of the high voltage output CHVM series of DC-DC converters. Capable of operating from a nominal 12V input, these non-isolated converters deliver output voltages ranging from 180V to 2,000V. Low output ripple and noise is achieved through the use of a metallic case that provides five-sided shielding to reduce radiated emissions. The CHVM has been designed for use in noise sensitive applications, including photomultiplier tubes, photodiodes, scanning electron microscopes, X-ray fluorescence spectrometers, mass spectrometers and ultrasonic probes.

Learn more at

TDK Corporation Introduces the 750W Rated i7A Non-Isolated DC-DC Converters

May 14th, 2021

Capable of operating from an input voltage of 18V to 32V, the step-down converters deliver an output voltage that can be adjusted from 3.3 to 18V with an output current of up to 45A. The series has been optimized for a 24V nominal input and weighing just 25g, is intended for use in a wide range of applications including robotics, drones, medical, communications, industrial, test, measurement and battery powered equipment.

Learn more at

TDK Corporation Announces the ZBM20 12V, 15V and 24V 20A Rated Open-Frame Buffer Modules

April 19th, 2021

 The ZBM20 series provides an extended 380ms hold-up time to power supplies preventing data loss during brief power interruptions or allowing equipment to safely shutdown. Applications include industrial automation, robotics, test, communication and semiconductor fabrication equipment.

Learn more at

TDK Power Supplies: 4:1 Input 15 to 30W DC-DC Converters Have Medical and ICT Safety Certifications with 5kVac Isolation

October 21st, 2020

TDK Corporation (TSE 6762) announces the introduction of the 15 to 20W PXG-M and 30W PXD-M30 board mount DC-DC converter series. With 4:1 input ranges of 9 to 36Vdc and 18 to 75Vdc, the two series are certified to IEC 60601-1 (medical) and IEC 62368-1 (ICT – Information and Communication Technology equipment). The input to output isolation is 5,000Vac allowing them to be used in multiple medical and industrial applications.

Learn more at

TDK Corporation Announces 300W, 8A Rated i7C Non-Isolated DC-DC converters

May 29th, 2020

With an input range of 9 to 53Vdc, the 300W, 8A rated i7C non-isolated DC-DC converters output can be adjusted from 9.6 to 48V. The product’s topology enables a seamless transition from buck (voltage reduction) to boost (voltage increase) operation. The i7C is ideal for generating additional high power outputs, from existing 12, 24, 36 or 48V system voltages, in medical, communications, industrial, test and measurement and battery powered equipment.

Learn more at

TDK Corporation Announces the TDK-Lambda Brand DIN Rail Mount DDA DC-DC Converters

May 4th, 2020

TDK announces wide input and output range convection cooled DIN rail mount DC-DC converters delivering up to 250W per output.  The series uses step-down non-isolated power modules that operate from an input range of 9 up to 53Vdc, with a wide adjustable output voltage range of 3.3 up to 24V. The DDA is ideally suited for generating additional low cost, high current outputs from an existing 24V bus in industrial, semi fabrication and test and measurement equipment.

Learn more at

Announcing the introduction of the TDK-Lambda brand CUS600M AC-DC power supply series in a 3 x 5” footprint

March 11th, 2020

Rated at 600W these compact products meet curve B conducted and radiated EMI in either a Class I or Class II (double insulated) construction, without the need for external filtering.  This flexibility allows the CUS600M to be used in a wide range of applications, including home healthcare, medical, dental, test and measurement, broadcast and industrial equipment.

Learn more at

TDK Corporation announces 2000W Modular Power Supplies With Full MoPPs Isolation, Low Acoustic Noise and up to 18 Outputs.

November 26th, 2019

TDK Corporation announces the introduction of the TDK-Lambda brand QM8B modular power supplies rated at up to 2000W.  This further extends the QM series which can provide 550W to 2000W output power.  The QM8B models are available with up to 18 outputs, have full MoPPs (Means of Patient Protection) isolation and low acoustic noise.  With medical and industrial safety certifications, the power supplies are suitable for use in medical, test and measurement, communications and broadcast equipment. This avoids the need for multiple power supplies in systems requiring a large number of independent voltages.

Learn more at

TDK Corporation announces the introduction of the 48V 480W DIN rail power supply featuring a narrow 84mm width and long field life

October 15th, 2019

TDK Corporation announces the introduction of the TDK-Lambda brand DRB480-48-1 AC-DC DIN Rail mount power supply. With an efficiency of up to 93%, waste heat has been reduced, allowing the use of a compact enclosure size featuring a power density of 6 Watts per inch. The power supply is suitable for a wide range of industrial applications including factory automation, process control and test and measurement, particularly where there is limited room on the DIN mounting rail.

Learn more at