TDK Corporation announces the introduction of QM4 modular power supplies rated at 550 to 650W

July 9th, 2019

TDK Corporation announces the introduction of the TDK-Lambda brand QM4 modular power supplies rated at 550 to 650W.  This further extends the QM series which can provide up to 1500W output power.  The QM4 models are available with up to 10 outputs, have full MoPPs (Means of Patient Protection) isolation and low acoustic noise.  With medical and industrial safety certifications, the power supplies are suitable for use in medical, test and measurement, communications and broadcast equipment.

Learn more at us.tdk-lambda.com

Tags: ,
Posted in Showcase | No Comments »

TDK Announces 24V DIN Rail Power Supply Certified to Class II and Class 2 standards

February 25th, 2019

TDK Corporation (TSE 6762) announces the introduction of an 88W rated 24V model to the DRL series of low profile AC-DC DIN rail mount power supplies.  The DRL100-24-1/C2 is certified as a Class 2 power supply, in accordance with NEC (per UL1310), and as a Limited Power Source (per UL 60950 clause 2.5 requirements).  The unit is also has a Class II construction with double insulation for operation without an earth ground connection.  Applications include building automation, security systems, industrial process control, factory automation, and test and measurement equipment.

Learn more at www.us.tdk-lambda.com

Tags: , , ,
Posted in Showcase | No Comments »

TDK Announces 95% Efficient 960W DIN Rail Power Supply has a 1440W Peak Power Capability

February 25th, 2019

 

TDK Corporation (TSE 6762) announces the introduction of a 960W rated model to the DRF series of AC-DC DIN rail mount power supplies.  The high 95% efficiency produces less internal waste heat enabling electrolytic capacitors to run cooler, providing a calculated life of in excess of eleven years with a 75% load at 230Vac input.  The unit can supply a peak load of 1440W (24V 60A) for up to 4 seconds to power capacitive and inductive loads.  Applications include industrial process control, factory automation, and test and measurement equipment.

Learn more at www.us.tdk-lambda.com

Tags: , , ,
Posted in Showcase | No Comments »

TDK Corporation announces Convection Cooled 600W Programmable Power Supplies Are Certified to Medical and Industrial Standards

February 6th, 2019

 

TDK Corporation (TSE 6762) announces the introduction of the TDK-Lambda GXE600 programmable AC-DC power supplies.  The convection cooled 600W rated series is certified to the medical IEC 60601-1 and industrial IEC 60950-1 and IEC 62368-1 standards. The GXE600 is suitable for medical, industrial, test and measurement applications requiring wide-range output voltage and current programming, with sensitivity to noise from cooling fans.

The GXE600 is available with a nominal 24V or 48V output and can be programmed, using the RS-485 interface (Modbus RTU protocol) or an external 0 – 6V analog signal, for constant voltage and constant current (CVCC) operation.  The programming range is 20% to 120% for the voltage and 20% to 100% for the current.  In addition, the parameters for fault programming (protection level and recovery characteristics) and the slew rate timing can be changed.  Remaining electrolytic capacitor life, operating hours and alarm history can be read through the RS-485 interface, aiding remote preventative maintenance.

More information available at us.tdk-lambda.com

Tags: , ,
Posted in Showcase | No Comments »

Arrow Chicago Tech Expo 2018

October 31st, 2018

Last week Control Sales, Mill-Max, Sharp Displays and TDK Lambda were proud exhibitors and sponsors at the Arrow Chicago Tech Expo 2018 held in Hoffman Estates, IL.  The Arrow Tech Expo hosted over 25 technical supplier seminars and multiple supplier booths showcasing select product offerings. Event organizers were pleased with customer attendance and valuable supplier seminars and exhibitions.

According to Susan Leager, Director of Distribution at Control Sales, “the 2018 Arrow Technology Expo was an opportunity for us to meet with customers and discuss design challenges.  Product offerings from TDK Lambda, Sharp Displays and Mill-Max were met with great enthusiasm by our booth visitors.  A big thank you to the Arrow Electronics staff for all their hard work to make this year’s Expo a great success.”

———–

Sharp Microelectronics of the Americas (SMA) is a premier manufacturer of industrial and memory LCDs with a legacy of leading-edge, performance-based products.

Mill-Max manufactures high reliability precision-machined interconnect components.

TDK Lambda is a leader in the design and manufacture of a wide range of AC-DC power supplies and DC-DC converters.

Tags: , , , , , ,
Posted in Company News | No Comments »

TDK’s New Single Output 600 to 1200W Power Supplies Have Full MoPPs Isolation, Low Acoustic Noise and PMBus™ Communication

August 31st, 2018

 

 

TDK Corporation announces the introduction of the QS series of single output medical and industrial power supplies, rated at 600 to 1200W.  These configurable models have full MoPPs (Means of Patient Protection) isolation, low acoustic noise and a range of options including a PMBus communication with a high current standby voltage.  With medical and industrial safety certifications, the power supplies are suitable for use in medical, test and measurement, communications and broadcast equipment.

Learn more at www.us.tdk-lambda.com

Tags: , ,
Posted in Showcase | No Comments »

New From TDK: Medical / ITE Certified 2×4” Power Supplies With Optimum Performance up to 85°C Ambient Temperatures

February 6th, 2018

TDK Corporation announces the introduction of the TDK-Lambda brand CUS150M series of ACDC
150W rated power supplies, with the capability of operating in ambient temperatures of up to
85°C without the need for forced air cooling. Certified to medical and ITE standards for Class I
and II (no earth ground connection) operation, the product meets both curve B radiated and
conducted emissions. CUS150M target applications include medical, home healthcare, dental,
test and measurement, broadcast and industrial equipment.

Learn more at www.us.tdk-lambda.com

Tags: , , ,
Posted in Showcase | No Comments »

TDK Corporation Announces the 100W rated TDK-Lambda i3A Series

January 24th, 2018

TDK Corporation announces the introduction of the 100W rated TDK-Lambda i3A series of non-isolated DC-DC converters. Capable of operating from an input voltage of 9V to 53V, the step-down converter delivers an output voltage that can be adjustable from 3.3 to 16.5V or 5 to 30V with output currents of up to 8A. The series is designed to be used in a wide range of applications including medical, communications, industrial and test and measurement equipment.

Learn more at www.us.tdk-lambda.com

Tags: , , ,
Posted in Showcase | No Comments »

TDK Corporation announces the introduction of 500W Configurable Medical Power Supplies, with a Class I and Class II

January 5th, 2018

TDK Corporation announces the introduction of the XMS500 series of AC-DC power supplies, rated at 500W output power, with a Class I and Class II (no earth ground connection) construction.

Learn more at www.us.tdk-lambda.com

Tags: , , , ,
Posted in Showcase | No Comments »

Spotlight: TDK Lambda’s Z+ 200-800W Programmable Power Supply – DC power supply, function generator, communications ALL IN ONE!

November 9th, 2017

Control Sales is proud to spotlight TDK-Lambda’s Z+ Series of 200 to 800W programmable DC power supplies. These high-density, high efficiency, 2U format, bench-top and rack mountable power supplies are designed to meet the demands of a wide variety of ATE, Laboratory and OEM applications, including: Test & Measurement, Semiconductor Burn-in, Component Test, LED/Laser Test, RF Amplifiers, Electromagnetic and Electrochemical applications.

Z+ has ability to create and store up to 4 application specific test waveforms removing the need for an external controller in basic simulation tasks. Up to 12 values can be programmed using the waveform creator software provided and 4 waveforms can be stored in the Z+ unit’s memory. More complex waveforms can be created using LabView®.  These waveforms can be either repetitive or single-shot.

Find Z+ Data sheets, tech files, 12 set up videos at us.tdk-lambda.com

Tags: , , ,
Posted in Showcase | No Comments »

« Older Entries
Newer Entries »